8 mins read

How To control all your PC fans using Fan Control software

Fan Control, As The Name Suggests, Is A Great Tool That Gives You Full Control Over Your System Fans, Including Cpu Fans, Gpu Fans, And Even The Water Cooling Pump Connected To The Fan Header. Much Easier Than Controlling The Pc Fan By Voltage Limiters Or Adjusting His Bios.

Fan Control Is An All-In-One Solution For System Cooling Management. It’s A Bit Complex And Requires A Certain Level Of Expertise, But It’s Relatively Easy To Learn With A Little Help. This Is Where We Come In. This Section Describes How To Use Fan Control To Manage All Fans In Your System.

Note: This specific software is accessible on GitHub and has been developed by an independent software developer. I Used It For Several Weeks On A Desktop Pc Running Windows 10 Without Any Issues. However, We Are Not Responsible For Any Potential Damage It May Cause To Your System. If You Download And Use This Software, You Do So At Your Own Risk.

How To Use Fan Controls

Fan Control Is Available For Free On Its Git hub site And Official Website. According To The Developer, The Backend Part Of The Driver And Tools Was Not Written From Scratch. Instead, They Reused An Existing Hardware Library And Simply Added A User Interface On Top Of It. Therefore, Hardware Compatibility Issues Depend Entirely On Librehardwaremonitor And Nvapiwrapper .

Step 1: Download Fan Control From The Website Or Its Git hub Repository . Unzip The Package And Save All Files To A Folder. To Run The Tool, Open The Fan control.Exe File.

Step 2: The Main Home Screen Of The Software Is Divided Into 2 Sections: Controls And Speed. Each Card In The Control Section Corresponds To A Card In The Speed ​​Section. For Example, The First Card, Fan Control #1, Must Be The Control For Fan #1.

If You Have A Cpu Cooler Or Liquid Cooler Pump Connected To The Cpu Fan Header , It Should Default To Fan #1. All That’s Left Is All The Additional Case Fans And A Dedicated Card For The Graphics Card /Gpu Fan.

fan-control-main
Step 3: Test Each Fan To Ensure Correct Operation By Sensing Changes In Fan Noise And Airflow. This Can Be Done By Manually Controlling The Fan Speed. Select The Three-Dot Menu For Each Fan Control Card , Enable The Manual Control Option, Then Select The Toggle To Enable The Slider. Use The Slider To Increase Or Decrease The Fan Or Pump Speed. You Should Confirm That The Controls Are Working By Checking For Speed Changes Reflected On The Sensor Card And Ideally Hearing Any Differences From The Fan.

fan-control-enable-manual-control

Step 4: Once You Have Identified All Your Fans, Rename Them For Easier Identification. Click On The Title Of Each Card And Assign A Name Accordingly. You May Also See Some Additional Cards Under The Controls Section. These Are Basically Unused Headers On The Motherboard. To Hide Them, Select An Option From The Three-Dot Menu In The Top Right Corner Of Each Card.

fan-control-fan

 

Step 5: Running Your Pc Fan At Maximum Speed May Sound Like A Good Option For Increasing Cooling Capacity, But Keep In Mind That There Are Some Drawbacks. Increasing Fan Speed Increases Noise, Which Affects The Entire Life Cycle Of The Fan. Additionally, If You Have An Intake Fan, It Will Bring In More Dust , Which Will Increase The Frequency Of Cleaning .

Step 6: Besides Controlling The Fan Speed Manually, You Can Also Create Your Own Fan Curve. A Fan Curve Is A Graph That Shows How Fast Your Fan Spins When Your Pc Reaches A Certain Temperature, Making It Easy To Customize Cooling Based On Temperature And Noise Level.

To Add A Fan Curve, Select The Plus Button In The Bottom Right To Display A Set Of Fan Curve And Temperature Sensor Options. The Graph Fan Curve Option Is The Simplest Because You Only Need To Assign What Percentage Of The Total Fan Speed A Particular Fan Should Operate At A Particular Temperature.

fan-control-adding-fan-graph
Step 7: Select The Graph Fan And The Card Will Appear Under The New Curve Section. To Set Up A Curve, You Must First Select A Source. Selecting The Temperature Source Option Will Bring Up A Menu Containing Various Sensors Built Into The Motherboard And Other Connected Components.

Considering That The Cpu And Gpu Are Typically The Hottest Components In A Pc, It’s Best To Optimize Airflow And Base Your Fan Curves On One Of The Two. Learn More About Monitoring Cpu Temperature.

fan-control-seleting-temperature-source

Step 8: To Easily Create A Cpu Fan Curve, Select The Cpu Package Shown In The Temperature Source Drop-Down Menu . Select The Edit Button To Configure The Graph . A New Pop-Up Window Will Appear And You Can Interact With It By Simply Adding Points On The Graph Or Entering Parameters At The Bottom. Assign A Specific Percentage Of Fan Speed That Corresponds To Temperature.

When You Are Satisfied With The Fan Curve, Select Ok To Save. Similarly, You Can Create A Gpu Fan Curve By Selecting The Gpu As The Temperature Source.

fan-control-fan-curve-graph

Step 9: Once You Have Created The Fan Curves, You Can Assign Them According To The Fans In Your System. If You Disable Manual Control, You Will Have The Option To Select A Curve. Assign The Correct Fan Curve To All Fans. Cpu Cooler Or Radiator Fans And Water Cooling Pumps Must Be Assigned To A Cpu Fan Curve So That They Operate In Response To Changes In Cpu Temperature.

If You Have Additional Fans That Draw In Fresh Air Or Exhaust Hot Air From The Gpu, It’s Best To Assign Them To The Gpu Fan Curve. By Doing So, The Fan Will Automatically Increase When The Gpu Is Under Heavy Load, Especially During Gaming.

Step 10: The Final Step Is To Save All The Configurations You Have Created. Open The Three-Dot Menu At The Top Right Of The Software And Select Save Settings . The Software Creates A Configuration File Containing All Settings That Can Be Easily Imported Or Exported. This Is An Important Step If You Don’t Want To Lose Your Settings.

How To Customize Fan Controls

Fan Control Is A Functionally Powerful Tool, But It Also Offers Many Style Customization Options To Make The Tool Your Own.

Step 1: Select The Three-Line Menu Icon On The Top Left To Access The Fan Control Settings.

Step 2: You Can Change The Fan Control Layout To Columns By Checking The Column Mode Box . You Can Also Adjust Which Cards Are Visible And Hidden, And Whether Windows Launches Fan Control.

Step 3: Select The Appearance Button To Adjust The Fan Control’s Coloc Scheme. By Default, It Syncs With Your Windows Theme, But You Can Choose The Primary And Secondary Colors For The Fan Control Window Using Sliders Or By Entering Html Color Codes.

Now That You’ve Got Your Fan Set Up, Why Not Try Your Hand At Custom Water Cooling? It’s Not As Difficult As You Might Think .

FAQs

What Does Fan Control Do?
Fan Control Is Software That Allows You To Control The Fans On Your Windows Pc. You Can Use This To Adjust Fan Speed And Build Fan Curves.

How Can I Lower My Cpu Temperature?
There Are Many Ways To Lower Your Pc’s Cpu Temperature. You Can Do Things Like Remove Dust From Your Pc, Lower The Voltage On Your Graphics Card, Or Remove The Side Panel Of Your Pc. If You Want Ideas On How To Lower Cpu Temperature, Or More Information On How To Implement Such A Solution, Check Out Our Guide On How To Lower Cpu Temperature .

Another Option Is To Remove Your Pc’s Current Cpu Cooler And Replace It With A New One. To Learn How, Check Out Our Guide On How To Install A Cpu Cooler .

What Is The Best Cpu Cooler?
The Answer To This Question Depends On Your Needs And Budget. However, You Can Narrow Down Your Options With Our Handy Guide On The Subject. Check Out Our List Of The Best Cpu Coolers.

Related

How to remove a account from Google Smart Lock

How to Verify Your Mac for Viruses and Malware

Leave a Reply

Your email address will not be published. Required fields are marked *